Skip to content Pool table weight & long-distance shipping
A pool table can weigh a few hundred pounds or more than 1,000 pounds, depending on its size and construction. Manufacturer examples range from the 306-pound Hathaway Alpine, an 8-foot non-slate table, to Diamond Pro-Am slate tables listed at 800, 1,000 and 1,200 pounds for their 7-, 8- and 9-foot sizes.
The exact model matters more than a size label alone. Start with its published weight, then check the complete cost of transporting it before deciding whether it is worth shipping.
The table below compares specific manufacturer listings. These are examples, not universal weights for every table of the same size. A lightweight non-slate design and a substantial slate model can both be sold as an 8-foot table.
| Model | Size | Playing surface | Listed weight | What the figure represents |
|---|---|---|---|---|
| Hathaway Alpine BG3147 | 8 ft | HDF, non-slate | 306 lb | Product-page weight; packed weight is not specified. Source 1 |
| Diamond Pro-Am | 7 ft | Slate | 800 lb | Table specification beside assembled dimensions. Source 2 |
| Diamond Pro-Am | 8 ft | Slate | 1,000 lb | Table specification beside assembled dimensions. Source 2 |
| Diamond Pro-Am | 9 ft | Slate | 1,200 lb | Table specification beside assembled dimensions. Source 2 |
| Brunswick Winfield | 8 ft | 1-inch framed slate | 746 lb Shipping weight | Explicitly labeled shipping weight in the 2022 sell sheet. Source 3 |
The Winfield figure uses a different weight basis from the table specifications above. Brunswick notes that weight can vary with wood species and leg options. Confirm the specification for your exact table before arranging transport.
If you are checking the weight because you are relocating, the next question is whether shipping the table costs less than replacing it. Keep both the weight and the service requirements in view.
A pool table’s weight comes from more than its playing surface. The bed, supporting structure and fitted components all contribute. That is why a single “average pool table weight” can be a poor guide to your actual shipment.
Slate is a stone playing bed. HDF is a wood-fiber board. Identify which your table uses before comparing it with another model; the felt covering alone does not tell you.
The support structure adds to the load. Compare the complete model specification rather than using the weight of its slate as the weight of the whole table.
Cabinet dimensions and fitted equipment affect the shipment. List a dining top, cue rack, stools and other accessories separately so they are accounted for in the quote.
Slate configuration also matters for handling. Diamond advertises one-piece and three-piece slate options. Dividing a slate bed into sections changes how it can be handled; it does not make the stone disappear from the shipment’s total weight. Ask the transporter to confirm the correct preparation method for your model.
No. These specifications answer different questions:
Diamond lists its 8-foot three-piece replacement slate set at 570 lb in its product specifications and 620 lb in its shipping specifications. Those figures describe that slate product, not a complete 8-foot table. The 50-pound difference also shows why the packed load needs its own specification.
A secondhand table may be packed differently from a new factory shipment. Give the carrier the manufacturer’s information, then have the final packed dimensions and weight confirmed. Do not assume that removing the legs changes the shipment’s total weight if the legs are traveling with it.
Weight alone is not a handling plan. Brunswick recommends experienced professionals for moving a billiard table. Arrange preparation and destination setup with people familiar with the construction of your particular model.
Published long-distance benchmark
uShip’s pool table guide gives this range for moves over 100 miles and notes that larger or more complex jobs can cost more. It is a broad reference, not an Ace quote or an all-inclusive cross-country rate.
For a useful comparison, look at the route and the services as well as the pounds. Two similarly sized tables can have different packing needs, access restrictions and destination setup requirements. A transport price is only comparable with another price when the scope is comparable.
| Listed shipment | Route | Date shipped | Posted price |
|---|---|---|---|
| 8-foot Brunswick; model unspecified | Chandler, AZ → Dallas, TX | June 29, 2026 | $992 |
| 9-foot pool table | Wayne, NJ → Delray Beach, FL | September 3, 2026 | $900 |
| Disassembled 9-foot table with an extra fourth slab | Sienna, TX → Canton, GA | August 8, 2026 | $1,818 |
| Antique 10-foot billiard table | Toomsuba, MS → Las Vegas, NV | May 13, 2026 | $2,606.27 |
Source: uShip’s posted shipment prices, checked October 28, 2026. Exact weights and full service inclusions were not verified. The Brunswick listing does not identify a Winfield, and the extra-slab shipment is an unusual load. These prices cannot be assigned to the models in the weight chart.
Have the provider mark each service as included, separately priced or excluded. If a quote bundles several services, count that charge once. When the table is traveling with the rest of your home, ask about the additional cost of including it in your long-distance move.
Compare the total cost of keeping your existing table with the net cost of an equivalent replacement. A cheaper table with a different playing surface or condition may not be an equivalent substitute.
Preparation + packing + transport + destination setup + other required costs
Include any necessary repair or cloth work in the comparison. Check that the written total covers the services you need.
Comparable table + delivery + setup + tax − net sale proceeds
Use a realistic resale amount after selling costs. Compare tables with similar construction, condition and playing quality.
Illustration only—not a shipping quote
If shipping and setup total $1,800, while an equivalent replacement costs $4,000 delivered and installed, selling your current table for $800 net makes replacement a $3,200 decision.
In that example, shipping costs $1,400 less. Change the inputs to your actual quotes before deciding.
Shipping deserves a closer look when the table is in good condition, difficult to replace or meaningful to your family. Replacing it may make more sense when the complete transport and repair bill exceeds the cost of a suitable alternative. If one quote omits setup or crating, get that missing cost before choosing.
Also confirm that the destination room suits the table and leaves space to play. For other large items on your inventory, our guide to moving furniture versus selling and starting fresh uses the same total-cost approach.
Send the same details to each provider so the estimates are easier to compare:
If a detail is unknown, say so. A useful estimate starts with an accurate description, not a guessed weight or an assumption that every pool table can be handled the same way.
There is no single weight for every 7-foot slate table. The Diamond Pro-Am example above is listed at 800 pounds. Use the manufacturer’s specification for your model and confirm whether the number includes packing.
Construction makes a substantial difference. The examples above include a 306-pound Hathaway Alpine with an HDF playing surface and a 1,000-pound Diamond Pro-Am slate table. Neither figure should be treated as the weight of every 8-foot table.
Do not assume it does. Read the manufacturer’s packaging notes and ask the carrier what will be included in your particular load. A factory shipping specification may not describe the packing used for a later household shipment.
Weight is only one part of the quote. Route, packed dimensions, access and required services also matter. Compare written estimates for the same shipment details rather than multiplying the table’s weight by an assumed per-pound rate.
Ask Ace what transporting your model would involve. Have the table details, pickup and delivery ZIP codes, and access information ready so you can discuss the service requirements and compare the cost with replacement.
Plan your long-distance moveResearch checked October 28, 2026. Manufacturer figures describe the specified products; historical shipment prices are individual examples. Confirm current specifications and obtain a written estimate for your route and services.